3n!Gma
15-11-2007, 05:16 PM
السلام عليكم ورحمة الله وبركاته
معلومات عن النت كات "NetCat
Netcat help
هذه هي الطريقة التي يتم فيها تقديم المساعدة في النت كات
اذهب الى
Start
Run
Cmd "COMMAND
write
nc -h
ستظهر لك هذه الصورة
http://www.is-sw.net/vb/imgcache/984.imgcache.jpg
هنا خدمة في النت كات لعمل سكان للبورتات
فلكي يتم الاتصال عبر بورت ما ، يكفي ان تكتب في الدوس الأمر
nc ip_serveur port
أقدم لكم بعض الأمثلة:
nc ftp.sunset.se 21-
هذا الأمر يخليك تعمل كنكشن عبر الاف تي بي
ftp ftp.sunet.se
(port ftp = port 21).
بعدها يلزم كون على علم بأوامر الاف تي بي طبعا
هنا مثال بسيط للي ما فهم
صورة موضحة
http://www.is-sw.net/vb/imgcache/985.imgcache.jpg
مقابل الأسهم الزرقاء هي وين لازم تكتب
nc hostname.com 23-
هذا الأمر يخليك تتصل بالبورت 23 port
telnet of thehostname.com 's adresse .
أكدت بأن النت كات هو التل نت الأفضل
لهذا نتعامل مع
nc -t hostname.com 23
كذلك يمكننا عمل اتصال مع webserveur with the port 80 open
Netcat-server
و اذا تبي تخلي النت كات تحت الاستماع في بورت ما بجهازك ، ليس عليك إلا ان تستعمل الأمران او -options-
p -l -
i-
(listen et port)
like that :
nc -l -p 80
l- لتخليه في المود listen
p- لتخليه في المود listen في البورت المطلوبport
بعدها لا يحدث شيئ فلازم تخليه يشتغل بالبورت المطلوب في نافذة أخرى
لذا اكتب الأمر
telnet 127.0.0.1 80
على سبيل المثال
لكي تتصل بالبورت 80
و انتضرها حتى تعمل اتصال 100%
يعني حتى تؤدي واجبها كاملا ولا تستعجل
الآن يمكنك أن تلاحظ انك في حالة ما اذا اغلقت النافذة للclient (telnet) نافذة السيرفر ترجع و بهذا التل نت لم يعد يعمل و النت كات ليس مفتوحا
لكن
هناك امر آخر يخلي النت كات يرجع يتنصت بالبورت
هاهي على سبيل المثال و دائما مع البورت 80
nc -L -p 80
يس قد لاحظت انها تختلف فهناك فرق بين
-L و -l
فقد تم استبدال الاولى بالثانية
و هناك أيضا الأمران
-v
-w
على سبيل المثال
nc -L -vv -p 80
بعدما تكتبها يقلك
listening on [any] 80 ...
و كما يعلم الجميع ان لم اعمم
البورت 80 هو البورت Pardefaut لأي سيرفر ويب
لذا انت روح و اكتب
http://127.0.0.1
على سبيل المثال
روح و شوف هالحين نافذة النت كات
وش شفت ؟؟
عجيييب هاه ؟
ايوة بعرف ، the initial text that the navigator to the websites sends
?Magik huh
:1 (76):
Afterward as much you to say that while informing itself a little on the orders http, you can resume to your navigator and so on, which emulerait a true waiter web.
Redirections
Know also as with Netcat, to the picture of what one can do under Unix, you can rediriger the entrees and gone out using the caracteres < et >. 4 Example:
الأمر
nc -L -vv -p 21 > ftp.log
هذا سيعمل لوق لكل الأموامر المبعوثة للنت كات على البورت 21
nc -L -vv -p 21 < ftp.txt
In this direction this is ftp.txt that will use file of ïnstruction to Netcat. Launch a customer telnet, and you will see that Netcat not more will receive the caracteres type to the keyboard but well those that are located in our ftp.txt.
The option
e-
Also can use redirection in the direction o she allows executer a program in entree. For example:
nc -L -vv -p 21 -e cmd.exe
هذا الأمر راح يفتح الدوس "cmd.exe في نافذة client telnet
و الأفضل من هذا انه بإمكاننا فصل النت كات عن نافذة الأوامر او التحكم التي بها نشغله
لذا اذا كنت تريد عمل او صنع سيرفر نات كات صغير لعوامل عدة ، أيجب عليك ان تتحمل نافذة التحكم تلك ؟؟؟
لا لست مجبرا ...اذا كان الأمر
d- يمنحك لقطع اتصال النت كات من تلك النافذة كما سبق و ذكرت
You have it still in your list of process and can thus the killer when you have some more need, but it does not post himself more has the ecran. Thus a person poorly Devil would have no evil to leave a harbor in ecoute at your place discreetly...
Other Options
الأوامر الأخرى بإختصار :
Other options in short:
N-
to enter only of numerical IP addresses, not of host names (customer mode).
O-
for logguer all bytes but into hexadecimal this time.
W-
timeout, to stop the attempt at connection if time is left
U-
this mode makes it possible to work with protocol UDP instead of TCP
(customer modes and waiter).
S-
the local address IP on which you will put yourselves in listen.
و هنا اكتمل الشرح
:devil1: و أرجو عند النقل الحفاظ على حقوق الكاتب :devil1:
الموضوع كتب من قبل أختكم
Omega HaCKEr
و طلبا من الأخ Evil_hacker
مع خالص تحياتي
معلومات عن النت كات "NetCat
Netcat help
هذه هي الطريقة التي يتم فيها تقديم المساعدة في النت كات
اذهب الى
Start
Run
Cmd "COMMAND
write
nc -h
ستظهر لك هذه الصورة
http://www.is-sw.net/vb/imgcache/984.imgcache.jpg
هنا خدمة في النت كات لعمل سكان للبورتات
فلكي يتم الاتصال عبر بورت ما ، يكفي ان تكتب في الدوس الأمر
nc ip_serveur port
أقدم لكم بعض الأمثلة:
nc ftp.sunset.se 21-
هذا الأمر يخليك تعمل كنكشن عبر الاف تي بي
ftp ftp.sunet.se
(port ftp = port 21).
بعدها يلزم كون على علم بأوامر الاف تي بي طبعا
هنا مثال بسيط للي ما فهم
صورة موضحة
http://www.is-sw.net/vb/imgcache/985.imgcache.jpg
مقابل الأسهم الزرقاء هي وين لازم تكتب
nc hostname.com 23-
هذا الأمر يخليك تتصل بالبورت 23 port
telnet of thehostname.com 's adresse .
أكدت بأن النت كات هو التل نت الأفضل
لهذا نتعامل مع
nc -t hostname.com 23
كذلك يمكننا عمل اتصال مع webserveur with the port 80 open
Netcat-server
و اذا تبي تخلي النت كات تحت الاستماع في بورت ما بجهازك ، ليس عليك إلا ان تستعمل الأمران او -options-
p -l -
i-
(listen et port)
like that :
nc -l -p 80
l- لتخليه في المود listen
p- لتخليه في المود listen في البورت المطلوبport
بعدها لا يحدث شيئ فلازم تخليه يشتغل بالبورت المطلوب في نافذة أخرى
لذا اكتب الأمر
telnet 127.0.0.1 80
على سبيل المثال
لكي تتصل بالبورت 80
و انتضرها حتى تعمل اتصال 100%
يعني حتى تؤدي واجبها كاملا ولا تستعجل
الآن يمكنك أن تلاحظ انك في حالة ما اذا اغلقت النافذة للclient (telnet) نافذة السيرفر ترجع و بهذا التل نت لم يعد يعمل و النت كات ليس مفتوحا
لكن
هناك امر آخر يخلي النت كات يرجع يتنصت بالبورت
هاهي على سبيل المثال و دائما مع البورت 80
nc -L -p 80
يس قد لاحظت انها تختلف فهناك فرق بين
-L و -l
فقد تم استبدال الاولى بالثانية
و هناك أيضا الأمران
-v
-w
على سبيل المثال
nc -L -vv -p 80
بعدما تكتبها يقلك
listening on [any] 80 ...
و كما يعلم الجميع ان لم اعمم
البورت 80 هو البورت Pardefaut لأي سيرفر ويب
لذا انت روح و اكتب
http://127.0.0.1
على سبيل المثال
روح و شوف هالحين نافذة النت كات
وش شفت ؟؟
عجيييب هاه ؟
ايوة بعرف ، the initial text that the navigator to the websites sends
?Magik huh
:1 (76):
Afterward as much you to say that while informing itself a little on the orders http, you can resume to your navigator and so on, which emulerait a true waiter web.
Redirections
Know also as with Netcat, to the picture of what one can do under Unix, you can rediriger the entrees and gone out using the caracteres < et >. 4 Example:
الأمر
nc -L -vv -p 21 > ftp.log
هذا سيعمل لوق لكل الأموامر المبعوثة للنت كات على البورت 21
nc -L -vv -p 21 < ftp.txt
In this direction this is ftp.txt that will use file of ïnstruction to Netcat. Launch a customer telnet, and you will see that Netcat not more will receive the caracteres type to the keyboard but well those that are located in our ftp.txt.
The option
e-
Also can use redirection in the direction o she allows executer a program in entree. For example:
nc -L -vv -p 21 -e cmd.exe
هذا الأمر راح يفتح الدوس "cmd.exe في نافذة client telnet
و الأفضل من هذا انه بإمكاننا فصل النت كات عن نافذة الأوامر او التحكم التي بها نشغله
لذا اذا كنت تريد عمل او صنع سيرفر نات كات صغير لعوامل عدة ، أيجب عليك ان تتحمل نافذة التحكم تلك ؟؟؟
لا لست مجبرا ...اذا كان الأمر
d- يمنحك لقطع اتصال النت كات من تلك النافذة كما سبق و ذكرت
You have it still in your list of process and can thus the killer when you have some more need, but it does not post himself more has the ecran. Thus a person poorly Devil would have no evil to leave a harbor in ecoute at your place discreetly...
Other Options
الأوامر الأخرى بإختصار :
Other options in short:
N-
to enter only of numerical IP addresses, not of host names (customer mode).
O-
for logguer all bytes but into hexadecimal this time.
W-
timeout, to stop the attempt at connection if time is left
U-
this mode makes it possible to work with protocol UDP instead of TCP
(customer modes and waiter).
S-
the local address IP on which you will put yourselves in listen.
و هنا اكتمل الشرح
:devil1: و أرجو عند النقل الحفاظ على حقوق الكاتب :devil1:
الموضوع كتب من قبل أختكم
Omega HaCKEr
و طلبا من الأخ Evil_hacker
مع خالص تحياتي